Uline H-7787 Manual Del Usuario página 2

3. Align bracket with holes in support spacer. Use four
M6 x 15 mm bolts (F) to secure. Repeat for remaining
bracket. (See Figure 3)
NOTE: For optional privacy panel brackets,
use Phillips screwdriver to tighten bolts.
Figure 3
4. With two people, insert privacy panel into
bracket. (See Figure 4)
Figure 4
Privacy Panel
PAGE 2 OF 6
ASSEMBLY CONTINUED
Bracket
F
Panel-Holding
Bracket
1-800-295-5510
uline.com
5. With two people, place tabletops on assembled frame.
Align tabletops with holes on legs. (See Figure 5)
Figure 5
A
6. Attach tabletops to legs using six
M6 x 45 mm bolts (A) per leg. (See Figure 5)
7. Attach tabletops to leg brackets using two
M6 x 15 mm bolts (B) per bracket. (See Figure 5)
8. Attach tabletops to support rails using three
M6 x 60 mm bolts (C) per rail. (See Figure 5)
9. Tighten bolts (D) installed in Step 1.
Tabletop
C
B
0921 IH-7787