Installation Options - EAS ELECTRIC EMH46RN Manual De Instrucciones

Installation options

On base cabinet with door
When constructing
precautions must be taken to prevent contact with
the casing of the hob, which becomes very hot
during operation. The recommended method for
overcoming this problem is illustrated in fig.1
The panel underneath the hob must be easily
removable to allow the hob to be locked in
position and released in case of servicing work.
On base cabinet with oven
The installation
compartment must have
the dimensions shown in
figures 2 and 3 and must
have supports to allow
satisfactory ventilation.
Two possible methods for
avoiding overheating are
illustrated in figures 3 and
4. The electrical
connections of the hob
and oven must be made
separately both for
electrical reasons and to
simplify removal of the
oven through the front of
the cabinet.
Wall cabinets or extractor
hoods must be at least
650 mm above the hob.
the cabinet,
17
suitable
V.1