EAS ELECTRIC EHH210 Manual De Instrucciones página 19

Please do not prolong the power cords by

yourself or use movable socket.
 Unplug heater by grasping plug and pulling
it from the outlet. Never yank on cord.
 lf the supply cord is damaged, it must be
replaced by its service agent or a similarly
qualified person in order to avoid hazard.
 Do not use in locations when the heater will
be left unattended for long periods of time
(for example - several weeks in an unoccu-
pied summer cottage).
 Do not use attachments not recommended
and sold by EAS Electric Smart Technology or
its distributors.
 Loose connections between the heater plug
and the electrical outlet may cause the plug
to overheat.
 Ensure no other appliances are plugged into
the same circuit as your heater. A circuit
overload could occur resulting in dimmed
lights, blown fuses, tripped circuit breakers
or fire hazard.
 The heater is intended for household indoor
use only.
 The heater must not be located immediately
below a socket outlet.
3
V.1