Placement Of Standby Generator To Reduce The Risk Of Carbon Monoxide Poisoning - Briggs & Stratton 076180 Manual De Instalación Y Arranque

Placement of Standby Generator to REDUCE THE RISK OF CARBON MONOXIDE POISONING

The circled letters in the figure below show POTENTIAL points of entry for Carbon Monoxide Gas.
C
All fossil fuel burning equipment, such as standby
generators, contains carbon monoxide (CO) gas in the
engine exhaust. CO gas is odorless, colorless and tasteless
and is unlikely to be noticed until a person is overcome.
CO gas can kill you so it is required that the following is
included as part of the installation:
• Install generator outdoors in an area that will not
accumulate deadly exhaust gas.
• DO NOT install generator where exhaust gas could
accumulate and enter inside or be drawn into a
potentially occupied building or structure.
• By law it is required in many states to have a Carbon
Monoxide (CO) detector in operating condition in
homes and other structures occupied by people.
Carbon monoxide detector(s) (A) MUST be
installed and maintained indoors according to the
manufacturer's instructions / recommendations.
A CO monitor is an electric device that detects
hazardous levels of CO. When there is a buildup of
CO, the monitor will alert the occupants by flashing
visual indicator light and alarm. Smoke alarms
cannot detect CO gas.
• Nearby structures may be exposed to the engine
exhaust from your standby generator and must be
considered when installing your standby generator.
12
A
B
• Ensure exhaust gas is kept away from:
B
B overhead doors
C
C doors
D D windows (not shown)
E other openings that can allow exhaust gas to enter E
inside or be drawn into a potentially occupied building
or structure (not shown).
A
B
BRIGGSandSTRATTON.COM