Before First Use; Using The Fryer - Mx Onda MX-FR2127 Manual De Instrucciones

If the appliance is used incorrectly, and after allowing the appliance to cool
down, using a toothpick or similar object, all you need to do is press gently on
the reset button behind the control panel.

BEFORE FIRST USE

Unpack your fryer and read the instructions for use carefully.
Open the lid
Fold down the handle until it locks.
- Remove the basket by lifting the handle
- Remove the control panel and the removable bowl by lifting them
vertically.
Wash the oil container and the basket with hot water and washing up liquid,
rinse and dry carefully.
Replace the oil container

USING THE FRYER

1. Adding oil or fat
Open the lid
Remove the basket by raising the handle .If you are using oil, pour the oil
into the removable oil container up to the «Maxi» level never exceed the
«Maxi» level indicated in the removable bowl, as you run the risk of the
oil overflowing during frying.
If you are using blocks of fat, cut them into pieces, melt them in a
container and pour the melted fat into the container. Never melt the
blocks of fat in the basket or on the element.
Model
3.0 litre
Now you can start cooking.
Note:
When the level of fat in its solid state falls below the "mini" level, add 250 g.
2. Frying food
Set the thermostat to the required setting, then set the timer to the
required sttting,The control light comes on. When the oil has reached the
required temperature, the control light goes out.
Open the lid by lifting it with the handle.
Place the food in the basket.
Slowly lower the basket into the oil from the draining position.
Oil capacity
3.0 litre
Blocks of fat
5
2,5Kg