INSTRUCTIONS FOR USE
MACHINE DESCRIPTION
SWEEPER OPERATION CAPABILITIES
The Sweeper is designed and constructed to sweep
non-hazardous dust or light debris on smooth and solid
floors, light carpeting, in civil or industrial environments,
under safe operating conditions by a trained Operator.
Note:
Forward, backward, front, rear, left or right
are intended with reference to the operator's
position, with the hands on the handlebar (3,
Fig. C).
Control panel
(See Fig. B)
1.
Control panel
2.
Ignition key
3.
Discharged battery warning light
4.
Semi-discharged battery warning light
5.
Charged battery warning light
6.
Display
7.
Display selection button: hour counter/ hour and
minutes counter / battery voltage (V),
8.
Filter shaker push-button (optional)
9.
Panel fastening screws
Exterior general overview
(See Fig. C)
1.
Serial number plate / technical data
2.
Side broom latch
3.
Handlebar
4.
Drive lever
5.
Knobs to adjust the handlebar inclination
6.
Can holder
7.
Hood
8.
Rear wheels
9.
Pivoting front wheel
10. Side broom
11. Main broom
12. Side broom lifting and adjusting knob
13. Left side skirt
14. Right side skirt
15. Front skirt
16. Rear skirt
17. Hopper
18. Hopper latch
19. Hopper handle
20. Manual filter-shaker handle
21. Main broom access door
22. Left main broom height adjuster
23. Right adjuster of the main broom height
24. Main broom right door
25. Main broom right door fastening screws
26. Brake pedal on front wheel (optional)
Under hood
(See Fig. U)
1.
Hood (open position)
2.
Batteries
3.
Battery connector
4.
Electronic battery charger
5.
Battery charger power cord
4
All manuals and user guides at all-guides.com
6.
7.
8.
9.
10. Battery connection diagram
11. Charged battery warning light
12. Main broom belt
13. Drive belt
14. Drive pulley for main broom
15. Drive pulley for rear wheels
16. Fan
17. Main electric motor
18. Signal circuit fuse
19. Hood opening switch
20. Serial number plate / technical data
21. Grounding chain
TECHNICAL DATA
Dimensions
Cleaning width
(without side broom)
Cleaning width
(with side broom)
Machine length
Machine width,
(without side broom)
Height when the
handlebar is lowered
Minimum height from ground
Handlebar height
Main broom size
Side broom size
Max speed
Maximum slope
Hopper capacity
Machine total weight
(without battery)
Front wheel, steering
Rear wheels, driving
Electric motor
Weighted sound pressure
level (L
Batteries
- Lead, with acid electrolyte (WET)
- Gel, hermetic (GEL)
The machine setting performed at the factory is for lead –
acid (WET) batteries.
Battery voltage
Usable battery capacity
Battery compartment size
Dust control and filter
Paper dust filter 5-10 µm
Electric filter-shaker (optional)
Vacuum in main broom
compartment
Circuit breaker
Side broom motor fuse
Battery caps (Lead-acid battery)
Lead (WET) or gel (GEL) battery selector switch
(positioned on the electronic battery charger)
)
pA
Blue 32 – 146 2301 000(1)2005-03
Values
600 mm (23.62 in)
791 mm (31.14 in)
1070 mm (42.18 in)
773 mm (30.43 in)
836 mm (32.91 in)
40 mm (1.6 in)
926.46 mm (36.50 in)
ø 245 x 600 mm
(9.65x23.62 in)
ø 347 mm (13.7 in)
4.4 Km/h (2.7 mph)
2%
3
50 l (1.7 ft
)
99.82 Kg (220.1 lb)
ø 125/37.5-50 mm
(4.92/1.48-1.97 in)
ø 250 x 50 mm
(ø9.84x1.97 in)
600W (0.8 hp)
64 dB(A)
12 V
Max. 240 Ah
398x262x283
(15.7x10.3x 11.1 in)
2
2
2 m
(22 ft
)
12V, 30W
4 mm H
O
2
(0.63 in H
O)
2