Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
2)
Electrical safety
a) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
b) Do not expose work light to wet
conditions.
Water entering a work light will increase the
risk of electric shock.
3)
Personal safety
a) Stay alert, watch what you are doing
and use common sense when use work
light.
4)
Battery powered work light use and care
a) Recharge only with the charger
specifi ed by the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fi re when
used with another battery pack.
b) Use work light only with specifi cally
designated battery packs.
Use of any other battery packs may create
a risk of injury and fi re.
c) When battery pack is not in use, keep
it away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects that can
make a connection from one terminal
to another.
Shorting the battery terminals together
may cause burns or a fi re.
d) Under abusive conditions, liquid may
be ejected from the battery, avoid
contact. If contact accidentally occurs,
fl ush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
5)
Service
a) Have your work light serviced by a
qualifi ed repair person using only
identical replacement parts.
This will ensure that the safety of the work
light is maintained.
b) If appliance is not working as it should,
has been dropped, damaged, left
outdoors, or dropped into water, return
it to a service center.
4
SPECIFIC SAFETY RULES
1.
Do not use in locations where infl ammable
materials such as lacquer, paint, benzene,
thinner or gasoline are present.
Explosion or fi res might result.
2.
Do not use near objects generating high
heat.
Fires might occur if used near such locations.
3.
If you notice that the unit is generating
unusually high temperatures, operating
poorly, or making abnormal noises,
immediately stop using and shut off the
power switch. Request an inspection
and repair from the dealer where you
purchased the unit or a metabo HPT
Authorized Service Center.
4.
If the unit is mistakenly dropped or
strikes another object, make a thorough
check of the unit for cracks, breakage or
deformation, etc.
Injuries might occur if the unit has cracks,
breakage or deformation.
5.
Precautions during transport
•
Turn the switch off on the tool and remove
the battery.
•
Carry the tool by the handle on its body.
•
When transporting it via vehicle, take
appropriate steps to prevent it from falling
over or being damaged.
6.
NEVER use a work light for applications
other than those specifi ed in the instruction
manual.
7.
Handle work light correctly.
Operate the work light according to the
instructions provided herein. Do not drop or
throw the work light. NEVER allow the work
light to be operated by children, individuals
unfamiliar with its operation or unauthorized
personnel.
8.
Keep all screws, bolts and covers tightly in
place.
Keep all screws, bolts, and plates tightly
mounted. Check their condition periodically.
9.
Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner benzine,
carbon tetrachloride, and alcohol may damage
and crack plastic parts. Do not wipe them with
such solvents.
Wipe plastic parts with a soft cloth lightly
dampened with soapy water and dry
thoroughly.
Publicidad
Tabla de contenido
