Kinderkraft LIVY Manual De Uso página 36

2.A. Height adjustment of the footrest:
Adjust the height of the footrest to your child's height. Set the footrest (6) at the
desired height and connect it to the chair legs (4) with two bolts 15 A so that the
child's legs support themselves freely.
2.B. Removal of the tray and bow with straps:
There is a button under the tray (fig. O). Press it and pull the tray up and towards yourself.
To remove the bow with straps, press the button under the seat and pull the bow upwards,
disconnecting it from the seat and the backrest (fig. P.
3. Chair up to max. 110 kg:
See‫ي‬section‫.1ي‬B‫"ي‬Assembling‫ي‬the‫ي‬high‫ي‬chair"‫ي‬for‫ي‬fitting‫ي‬the‫ي‬chair‫ي‬legs.‫ي‬The‫ي‬footrest‫ي‬can‫ي‬be‫ي‬fitted‫ي‬
or omitted if the target user is comfortable resting their feet on the ground. Slide the seat (7)
in between the legs of the chair (fig. K). Set the seat at the desired level and join it to the legs
with two bolts 15 A. Then insert the backrest of the chair into the notches in the upper part of
the legs (fig. L I). Screw the backrest to the legs with four bolts 15C (fig. L II).
3.A Seat height and depth adjustment:
The seat as a chair can be mounted on one of the four levels marked on the legs. Adjust the
seat to the desired position and connect it to the legs using two bolts 15 A.
In addition, the seat as a chair has a 3-stage depth adjustment (fig. R). Remove the bolts
connecting the upper seat plate to its frame (fig. R I, R II, R III). Adjust the seat depth to your
needs and reconnect the two pieces by tightening with three bolts. Position 1 – most
retracted. Position 3 – most extended. Attention! For the feeding chair, the upper seat plate
must be placed in position 1 - the most retracted position.
Remember that the Allen key (16) can be stored in the holder under the seat.
4. Strap adjustment:
On the bouncer and feeding chair the straps are adjusted by sliding the plastic buckles along
the straps. The straps should always be adjusted to securely hold the child.
5. Cleaning:
Sheathing of the bouncer: Undo the Velcro under the seat of the bouncer, then undo the
zipper. Disconnect the press studs connecting the sheathing to the frame. Slide the sheeting
off the frame. Wash manually.
Toys: wash manually with mild detergent.
Frame of the bouncer and chair: clean with a damp cloth and mild detergent.
Chair straps: clean with a damp cloth. Do not detach the straps from the bow yourself.
Cushion: wash manually.
Silicone mat: wash in warm water with a mild detergent. It is possible to clean the mat in the
dishwasher with standard cleaning agents.
Warranty
1. All Kinderkraft products are covered by a 24-month warranty. The warranty period starts
from the date the product is handed over to the Buyer.
36