Manufacturer's Warranty; Further Information; Mode D'emploi Original; Indications Relatives À La Documentation - Hilti TE 2000-22 Manual De Instrucciones Original

Ocultar thumbs Ver también para TE 2000-22:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Trouble or fault
Product cuts out while in op-
eration or does not start
11
Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
12

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
13

Further information

For more information on operation,
qr.hilti.com/manual/?id=2301752
This link is also to be found at the end of the documentation, in the form of a QR code.

Mode d'emploi original

1
Indications relatives à la documentation
1.1
À propos de cette documentation
Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.
1.2
Explication des symboles
1.2.1
Avertissements
Les avertissements attirent l'attention sur des dangers liés à l'utilisation du produit.
signalisation suivants sont utilisés :
DANGER
DANGER !
▶ Pour un danger imminent qui peut entraîner de graves blessures corporelles ou la mort.
12
Français
Possible cause
Product/batteries too hot or batter-
ies too cold.
technology,
environment and recycling,
Action to be taken
▶ Switch off; allow the
tool/batteries to cool down.
▶ Batteries too cold. Bring the
batteries to the recommended
working temperature.
follow this link:
2301753
*2301753*
Les termes de

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Te 500-22Nuron te 500-22

Tabla de contenido