Trouble Shooting The Generator - Coleman Powermate Industrial Serie Manual Del Operador

PROBLEM
Alternator Excitation Failure.
High no-load voltage.
Low no-load voltage.
Proper no-load but low loaded voltage. Low loaded speed.
Proper no-load but high loaded voltage. High speed in load condition.
Unstable voltage.
Wont Start or run.
Tank Expansion.
10

TROUBLE SHOOTING THE GENERATOR

POSSIBLE CAUSE
Low speed.
Faulty capacitor.
Faulty windings.
Speed too high.
Capacitor with high capacity.
Speed to low.
Faulty rotary diodes.
Breakdown in windings.
Capacitor with low capacity.
Load too big.
Rotary diodes short-circuited.
Loose contacts.
Change in engine speed.
Foreign debris in muffler.
No gas.
Spark pulg not connected.
Battery cable hooked up wrong. Check and change if necessary.
Air cleaner plugged.
Fuel cap not venting.
SOLUTION
Check rpm and set at nominal value.
Check and replace.
Check windings resistance.
Check and adjust rpm.
Check and replace.
Check and adjust rpm.
Check and replace.
Check winding resistance.
Check and replace.
Check and regulate rpm.
Check and change.
Check and replace.
Check and regulate rpm.
Check connections.
Check and regulate rpm.
Check and clean muffler exhaust.
Add gas to tank.
Turn fuel valve on.
Connect apark plug wire.
Check and clean or replace.
Check and replace cap.
English