Electrical Safety; Personal Safety - HammerSmith MultiTool M22606 Instrucciones De Uso

Ladegerät (PLCP-001A)
Nennleistungsaufnahme: 70W
Eingangsspannung: AC 220-240V, 50-60Hz, 70W
Ausgangsspannung: 14.4-18V⎓⎓ 2.4A
Read this instruction manual carefully before
using the device! Follow all safety instructions
to avoid damage that could result from incorrect
use! Retain this instruction manual for future
reference. Should the appliance be transferred to
third parties, so must this instruction manual.
WARNING: Failure to follow warnings and
instructions could result in electric shock,
fire and/or serious injury.
SAFETY NOTICES
1. WORKPLACE SAFETY
• Always keep the workplace clean and well-lit.
Cluttered and poorly lit workplaces increase the risk
of accidents.
• Do not use the device in potentially explosive areas,
such as in the vicinity of flammable liquids, gases,
vapours or dust. The device can generate sparks,
which can ignite dust or fumes.
• Keep children and bystanders clear when operating
the device. Distractions can lead to loss of control of
the device.

2. ELECTRICAL SAFETY

• The plug on the device must be suited to the socket,
and must not be modified in any way. Do not use
adapter plugs with earthed power tools. This will
avoid the risk of electric shock.
• Do not use the device in the rain or in any other damp
environment. If water enters the device, this will
increase the risk of electric shock.
• Always handle the cord with care. Never use the
cord to carry, drag or unplug the device. Keep the
cable clear from heat sources, oils, sharp edges and
M22606_HammersmithMultitool_Manual_A5_20220126_TC_V02.indd 13 M22606_HammersmithMultitool_Manual_A5_20220126_TC_V02.indd 13
Hergestellt in China
EN
moving parts. Damaged or tangled cables increase
the risk of electric shock.
• When using the device outdoors, only ever use an
extension cable that is suitable for outdoor use.

3. PERSONAL SAFETY

• Remain alert and apply common sense when
operating the device. Do not use the device when
you are tired or under the influence of drugs, alcohol
or medication. A brief lapse of concentration while
operating the device could result in serious personal
injury.
• Always use appropriate protective equipment. Wear
eye protection, a dust mask, safety shoes, helmet
and/or hearing protection that is required for the
respective conditions; these reduce the risk of injury.
• Avoid unintentional starting of the device. Ensure
that the device switch is in the OFF position before
inserting the battery pack, picking up, or operating
the device. Powering up the tool with the switch
turned to ON can lead to accidents.
• Remove the adjustment key before switching on the
device. If a wrench or adjustment key is left on the
rotating part of the power section, this can lead to
injuries.
• Do not over-tighten the attachment. Always make
sure that you can maintain a strong and balanced
stance. This assures better control in unexpected
situations.
• Do not over-estimate your capacities. Make sure
you have a secure stance and balance at all times.
This allows for better control over the device in
unforeseen situations.
• Wear appropriate clothing. Do not wear loose
clothing or jewellery. Make sure that hair, clothing
and gloves cannot become caught in the moving
parts.
13
15.02.22 14:31 15.02.22 14:31