Kinderkraft MIMI Manual De Uso página 19

List of components
1. Unfolding/ folding the bouncer:
A plastic piece is mounted on the leg of the bouncer to support its frame (fig. A). To unfold
the bouncer slowly lift the frame (fig. B) while holding the leg. Choose the position you want
(fig. D I, D II, D III) and insert the metal support in one of the three holes in the connector (fig. C
I).
To fold the bouncer pull the frame up slightly (while holding the leg of the bouncer), so that the
metal support comes out of the connector. Press the red button and gently guide the frame of
the bouncer downwards (fig. C II).
2. Assembling the toy bar:
Hook the toy bar support (2) into the frame of the bouncer (1) in the free space in the fabric on
the side of the bouncer (fig E). The hole in the support should be at the back of the bouncer.
Hook the toys (4a, 4b) on the bar (3) (fig. F). Slide the toy bar (3) into the bracket (fig. G).
3. Removing the cover
Unhook the support leg of the toy bar (fig. H I). The cover of the bouncer is hooked to the frame
with black rubber bands. To remove the cover, push the rubber bands to the outside of the base
(fig. H II). Firmly pull the cover upwards (fig. H III).
4. Adjusting the straps
The lap belts can be adjusted using the plastic buckles located on either side of the crotch strap.
5. Cleaning
The cover can be washed at 30 degrees.
Hand wash the toys with a mild detergent.
Wipe the frame and the toy bar with a damp cloth and mild detergent.
Do not wash. Clean the product
gently with a damp cloth and a mild
detergent.
Do not bleach
Do not dry clean
Storage
Child bouncer
1.
Toy bar support
2.
Toy bar
3.
Toys
4.
19
Wash at max. 30°C, gentle
process.
Do not tumble dry
Do not iron