Basic Operation (Selecting The Input Source) - Plus U2-1130 Manual Del Usuario

B a s i c o p e r a t i o n ( S e l e c t i n g t h e i n p u t s o u r c e )
OFF POWER
VIDEO S-VIDEO
RGB
MENU
MENU button
–
R-CLICK
POINTER MUTE
MAGNIFY KEYSTONE
+ +
– –
PLUS
1
Press MENU.
The button lights in red and the main menu
appears on the screen.
If you don't proceed to step 2 within ten seconds,
the button goes off.
MENU
Note
The menu will not be dis-
played if the picture is en-
larged even slightly. In
such a case, reduce the pic-
ture size to normal before
starting the menu opera-
tion.
2
Press the cursor
"SOURCE MENU."
– +
3
Press L-CLICK.
The source menu appears on the screen.
4
Press the cursor
desired input source.
– +
All manuals and user guides at all-guides.com
ON
L-CLICK button
(On bottom of
LASER
the remote
control)
+
Cursor key
R-CLICK button
FREEZE
VOLUME
+
–
MENU
SOURCE MENU
IMAGE ADJ MENU
POWER MENU
SETTING MENU
/ key to select
SOURCE MENU
IMAGE ADJ MENU
POWER MENU
SETTING MENU
VIDEO
AUTO
S-VIDEO
AUTO
RGB
AUTO
/ key to select the
VIDEO
AUTO
S-VIDEO
AUTO
RGB
AUTO
E – 23
5
Press L-CLICK.
The source you've selected in step 4 is con-
firmed, then the picture from the selected source
is projected on the screen.
6
Press R-CLICK to turn off the menu dis-
play.
Whenever you wish to turn off the menu display,
press the R-CLICK button.
R-CLICK
Operating using the unit
The menu operation is explained using the remote control, how-
ever, it can also be controlled using the unit operation buttons.
To operate using the unit, refer to the comparison table below.
STATUS
MENU
MENU button
SELECT
UP
DOWN
The remote control and unit button comparison table
Remote control buttons
MENU
The main menu appears on
the screen when you press
this button.
To turn off any menu, press
R-CLICK.
Cursor / keys
Press either key to select the
menu item.
Cursor + / – keys
Press either key to choose
the setting or value of the
selected menu item.
L-CLICK
Press this button whenever
confirmation is required.
POWER
ENTER
ENTER button
SELECT
UP/DOWN/+/–
buttons
Unit operation buttons
MENU
The main menu appears on the
screen when you press this
button.
To turn off any menu, press
R-CLICK on the remote
control.
(You cannot turn off the
menu with the unit's button.)
SELECT UP/DOWN
Press either button to select
the menu item.
SELECT + / –
Press either button to choose
the setting or value of the se-
lected menu item.
ENTER
Press this button whenever
confirmation is required.