Inserting The Batteries; How To Use The Carrying Case - Plus U2-1130 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 147
For video equipment connection
Audio video cable
(1 m/3.3 ft.) [1]
Lens cap (attached to the lens of the unit) [1]
About the lens cap
The lens cap is fixed on the bottom of the
unit as shown in the illustration below.
Carrying case [1]

How to use the carrying case

Packing the unit
USER'S MANUAL
(this manual) [1]
L/MONO
R
L/MONO
R
All manuals and user guides at all-guides.com
S-video cable
(1 m/3.3 ft.) [1]
Packing the accesories
Quick Start Guide [1]
E – 5
P r e p a r i n g
r e m o t e
c o n t r o l

Inserting the batteries

1 Press firmly and
slide the battery
cover off.
2 Insert the two
supplied batteries
(size AA/R6).
Ensure that the
polarities (+ and –)
of the batteries are
aligned correctly.
3 Slide the cover
back until it
snaps into place.
Notes
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• If you will not be using the remote control for a long time, remove the
batteries.
• Do not mix new and old or different types of batteries.
• There are operations that can only be carried out by remote control.
Handle the remote control carefully.
Remote control effective range
The remote sensors are located on the front and back of the unit.
The controllable range is 50 degrees horizontally and 30 degrees
vertically relative to a line that is at a right angle to the remote
sensor. And the distance between the point of the remote control
and remote sensor must be shorter than four meters (13 feet).
50˚
t h e
30˚
50˚
30˚

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

U2-1110U2-811

Tabla de contenido