Mx Onda MX-HE2663 Manual De Usuario E Instalacion página 34

Important: The clock of this oven takes as reference the frequency of the
mains voltage 50 Hz, and it may be that in some cases the clock of the oven
will be ahead or behind. This is not a malfunction and can be caused by
disturbances in the electricity supply.
When the oven is plugged in for the first time, the time as well as the symbol
will appear flashing. To adjust the time, proceed as follows:
Actual time setting
To set the time, it is essential that the reminder timer or automatic cooking
mode is not running.
To adjust the time, follow the steps below:
1. Press and hold the
start to flash.
2. Using the buttons
hours.
3. To memorize the time, allow 6 seconds without touching any button or
press the button
Note: The time setting can also be done the first 7 seconds after turning on the
oven.
Timer
The timer (or countdown counter) is used to alert you with an audible signal
that a preset time has elapsed. This function is very useful when you need to
add ingredients, turn the food, vary the temperature, etc. during cooking.
Follow the steps below to set the timer:
1. Press the button
flashing.
2. With the
hours.
3. To start the timer, allow 6 seconds to elapse without touching a button or
press the button
4. After the previously set time has elapsed, a buzzer will sound and the
symbol
not press any button, the buzzer will stop sounding after 5 minutes.
Semi-automatic cooking
The semi-automatic cooking mode consists in which, once a previously set
time has elapsed, the oven turns off automatically.
and
and
.
once to enter the timer mode, the
and buttons set the timer time. The maximum duration is 10
.
will begin to flash. Press any button to stop the buzzer. If you do
buttons for 3 seconds, until the minute digits
set the current time. The clock format is 24
9
symbol will start
.