Mx Onda MX-HE2657 Manual De Usuario E Instalacion página 34

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The electrical connection of the oven must only be carried out in grounded
sockets, installed in accordance with current regulations. The manufacturer will
not be liable for damage caused by connection to ungrounded sockets.
To connect the oven to the mains socket, do not use adapters, reducers or
branches, as these devices can become hot and cause a fire.
The power cord of the oven must not touch any part or area where it acquires
high temperatures and must be positioned so that the temperature will not
exceed 75˚C at any point.
Check with a licensed and qualified electrician for proper electrical installation.
Any modification to the electrical installation must only be carried out by a
licensed electrician.
The electrical connection of the oven must be made in accordance with current
regulations and protected by a two-pole magnetothermic or automatic switch.
If the cable is damaged, to be substituted or replaced, the operation must
be carried out by an Official Mx Onda Technical Service.
The authorized installer must ensure that the correct electrical connection
has been made and that it complies with safety regulations.
The cable must not be bent or compressed.
The cable should be checked regularly and replaced only by authorized
technicians.
The manufacturer is not responsible for any accident resulting from the use
of an appliance that is not grounded or from faulty grounding continuity.
The plug must be located in a place that can be accessed after installation.
INITIAL USE OF THE OVEN
Before using the oven for the first time, you must carry out the following
process:
1. Remove the labels, packaging and protection elements, as well as the
accessories contained inside the oven.
2. Wipe the inside of the oven with a slightly damp cloth and close the oven
door.
3. Set the temperature selector to the maximum level 240 ºC.
4. Turn the on / off button and function selector to the heat position at the
bottom and top
5. Using the timer, choose an operating time of 30 minutes.
.
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mx-he2660

Tabla de contenido