Mx Onda MX-HE2657 Manual De Usuario E Instalacion página 38

Cleaning the inside of the oven
•
Do not use metal scourers that can scratch the surfaces, use specific
cleaning products for ovens.
•
For stubborn stains, clean after preheating at 90 ° C for 30 seconds.
•
Do not use steam cleaners.
•
After cleaning, remove the soap residue and thoroughly dry the oven walls.
Steam cleaning
The steam cleaning system will facilitate the removal of stubborn grease, as
well as solid remains adhering to the oven walls, the steam will soften the
grease and solid remains, making cleaning more comfortable and easy. Follow
the process below:
Remove all accessories from inside the oven.
1. Pour half a liter of water into the enamel
tray and place it at the bottom of the oven
(Figure 7).
2. Set the temperature selector to 70ºC.
3. Set the on / off button and function
selector to the position
4. Turn the timer to the 30 minute position.
5. At the end of the previously set time, open
the oven door and remove the fat and
solid remains with a slightly damp cloth.
6. For stubborn dirt, pour dishwashing liquid
on a damp cloth and rub until all dirt is
removed, then wipe dry with a clean, dry
cloth.
Removing and installing the oven door
The oven door can be removed to facilitate cleaning, to do this, follow the steps
below:
1. Fully open the oven door 90º, then unlock it by pulling the hinge lock up
with the help of a screwdriver as shown in Figure 8.1.
2. Set the hinge lock at the largest angle as shown in Figure 8.2. Adjust the
two hinges that hold the door to the oven to the same position.
3. Then close the door so that it is in contact with the hinge lock, as shown in
Figure 9.1.
4. In order to easily remove the oven door, when it approaches the closed
position, grasp the door with both hands and pull it upwards, see Figure
9.2.
.
17
Fig. 7