2. Install side brackets. (Fig. 8)
3. Fastening the unit. (Fig. 9)
As a rule, secure with side brackets (large).
Dashboard
All manuals and user guides at all-guides.com
Flush surface screw (5 × 6 mm)
182
53
Side bracket
(large)
Side bracket
Holder
After inserting the holder into the dash-
board, then select the appropriate tabs
according to the thickness of the dash-
board material and bend them.
(Install as firmly as possible using the
top and bottom tabs. To secure, bend
the tabs 90 degrees.)
Rubber bush
Screw
Attach screw
Fig. 8
Fig. 9
10