Zz Silver 1-1/8" Flat Head Screw - Sauder Registry Row 412267 Instrucciones De Montaje

6 6
Fill the hole 1/4 to 1/2 full with GLUE
+
PP
KK
First, fi ll the holes in one end of the UPPER LEFT END (B) 1/4 to 1/2 full with GLUE (KK). Then, insert two WOOD
DOWELS (PP) into these holes. Wipe away the excess GLUE.
Repeat this step for the other end of the UPPER LEFT END (B) and both ends of the LOWER LEFT END (C) and BRACE (I)
as shown above.
Now, fasten the BRACE (I) to UPPER LEFT END (B). Use two SILVER 1-1/8" FLAT HEAD SCREWS (ZZ).
412267
All manuals and user guides at all-guides.com
Caution
Inspect the parts thoroughly before
assembling. Disassembly of glued parts
is extremely diffi cult.
.
SILVER 1-1/8" FLAT HEAD SCREW
(2 used in this step)
Edge with
HIDDEN CAMS
I
B
The holes should be
closer to this edge.
www.sauder.com/services
ZZ
(8 used)
If the UPPER LEFT END (B) has an
unfi nished surface, it should be facing up.
C
PP
+
KK
Page 11