Zz Silver 1-1/8" Flat Head Screw - Sauder 412920 Manual De Instrucciones

Step 6
First, fi ll the holes in one edge of the UPPER LEFT END (B)
å
1/4 to 1/2 full with GLUE (KK). Then, insert the WOOD
DOWELS (PP) into the holes. Wipe away the excess GLUE.
Repeat adding GLUE and inserting the WOODEN
å
DOWELS in the short edges of the LOWER LEFT END (C)
and BRACE (I) as shown below.
Now, fasten the BRACE (I) to UPPER LEFT END (B). Use
å
two SILVER 1-1/8" FLAT HEAD SCREWS (ZZ).
Edge with HIDDEN CAMS
+
PP
www.sauder.com/services
SILVER 1-1/8" FLAT HEAD SCREW
I
B
The holes should be
closer to this edge.
KK
ZZ
(2 used in this step)
412920
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Fill the holes 1/4 to 1/2 full with GLUE.
(8 used)
PP
+
C
KK
Page 11