Midea BOP90E3BL Manual De Usuario página 123

7. Start/Pause/Cancel Function
• If the cooking time has been set, press "
If the cooking is paused, press "
• During cooking process, press "
Press " " twice to cancel the cooking.
8. Energy-Saving Function
• In waiting state and reminding state , press "
display will go off and set to energy-saving mode.
• If no operation in 10 minutes under waiting state, the LED display will go off
and go into energy-saving mode.
• Under the energy-saving mode, press any key or rotate any knob can quit the
energy-saving mode.
9. Pyrolytic Function
This function allows you to clean thoroughly the oven cavity.
• Rotate " K1" to select the pyrolytic function. LED will display " PyR ".
• Press "
display on the LED.
• Rotate " K1" to change the pyrolytic time. The timer can be set 1:30 or 2:00
hours.
Note
LED will display " door " and " PyR ".
• When the oven's center temperature is highter than 320O C, pressing start
• Open the door when the oven is working, the LED will display " door " and
• Before activating the pyrolytic cleaning function, remove any excessive
spillage and make sure that oven is empty. Do not leave anything inside it
damage them.
" to start cooking.
" to resume cooking.
" once to pause the cooking.
" for three seconds, the LED
EN-12