Before You Begin; What Is Included; Unpacking Instructions; Safety Instructions - Chauvet DJ Obey 10 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

1. B
EFORE

What is Included

Ø
Obey 10 controller
Ø
DC 12V 500 mA, 110V Power Adapter or 230V Power Adapter
Ø
User Manual
Ø
Warranty card

Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure
that all parts are present, and have been received in good condition. Notify the shipper
immediately and retain packing material for inspection if any parts appear damaged from
shipping or the carton itself shows signs of mishandling. Save the carton and all packing
materials. In the event that a fixture must be returned to the factory, it is important that the fixture
be returned in the original factory box and packing.

Safety Instructions

·
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure
that they also receive this instruction booklet.
·
Always make sure that you are connecting to the proper voltage and that the line voltage you are
connecting to is not higher than that stated on decal or rear panel of the fixture.
·
This product is intended for indoor use only!
·
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no
flammable materials close to the unit while operating.
·
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces. Be sure that no ventilation slots are blocked.
·
Always disconnect from power source before servicing or replacing lamp or fuse and be sure to
replace with same lamp source.
·
In the event of serious operating problem, stop using the unit immediately. Never try to repair the
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center. Always use the same type
spare parts.
·
Do not connect the device to a dimmer pack.
·
Make sure power cord is never crimped or damaged.
·
Never disconnect power cord by pulling or tugging on the cord.
·
Do not operate this device in more than 113 °F ambient temperature conditions.
·
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it. To eliminate unnecessary
wear and improve its lifespan, during periods of non-use completely disconnect the product from
power via breaker or by unplugging it.
Caution!
There are no user-serviceable parts inside the unit. Do not open the housing or
attempt any repairs yourself. In the unlikely event your unit may require service,
please contact Chauvet at www.chauvetlighting.com.
Obey 10 User Manual
Y
B
OU
EGIN
Read these instructions carefully. They include important information
about the installation, usage and maintenance of this product.
5
Rev. 5

Publicidad

Tabla de contenido
loading

Tabla de contenido