Reverse Channel Output (Optional Setup); Reset To Factory Default; Blackout; Fade Assignment (Optional Setup) - Chauvet DJ Obey 10 Manual De Usuario

Reverse Channel Output (OPTIONAL SETUP)

Action ·
1) Press and hold PROGRAM & STEP/DIS
buttons together (2) times to access the
channel assignment mode then press the
FIXTURE button.
2) Select FIXTURE.
3) Move the SPEED fader until you arrive at
the controller channel you wish to alter.
4) Move the FADE TIME fader all the way up
until N changes to Y.
If you wish to copy a scanner's reverse channel
assignments to another scanner, continue by
following steps 5-11. If you do not wish to do
this, press and hold PROGRAM & TAPSYNC
buttons (1) times to exit mode.
Example: Copying Scanner 1 into
1) Press and hold FIXTURE button # 1.
2) While holding button # 1 press FIXTURE
button # 2.
3) While holding FIXTURE buttons # 1 and #
2, press and hold MUSIC/ADD button.
4) Release FIXTURE button # 1 first before
releasing FIXTURE button # 2.
5) Release MUSIC/ADD button.
6) All FIXTURES LED indicators will flash to
confirm successful copy.
7) Press and hold PROGRAM & STEP/DIS
buttons (1) times to exit mode.

Reset to Factory Default

Action ·
1) Press the STEP UP and AUTO/DEL
buttons simultaneously.
2) All LEDs will flash, indicating a successful
reset of the controller.

Blackout

The Blackout button brings all lighting output to 0 or off (also called the home position of the
unit).

Fade Assignment (OPTIONAL SETUP)

Use this feature to turn the fade slider on or off for a certain channel. This is most useful when
you want the fade time to affect the pan/tilt of a fixture for smoother movements, but do not wish
to use this function on things such as shutter or color or gobo, as these should switch very fast
most times.
Action ·
1) Press and hold BLACKOUT & STEP/DIS
buttons together (2) times to access the
channel assignment mode. then press the
FIXTURE button.
2) Select FIXTURE.
3) Move the SPEED fader until you arrive at
the controller channel you wish to alter.
4) Move the FADE TIME fader all the way up
until N changes to Y.
5) Press the MUSIC/ADD button.
6) Release MUSIC/ADD button.
7) All FIXTURES LED indicators will flash to
confirm successful setting.
8) Press and hold BLACKOUT & STEP/DIS
buttons (1) times to exit mode.
Obey 10 User Manual
Scanner 2
11
¥
Notes
You can permanently reverse the output of any
given channel on the controller.
¥
Notes
This will erase all saved Chases!
This will work in any mode: Program or
Playback.
¥
Notes
This will permanently turn on/off the fade time for
a channel, until the user turns it back on/off.
Rev. 5