Adding A Step To A Chase; Delete A Chase - Chauvet DJ Obey 10 Manual De Usuario

Adding a Step to a Chase

Action ·
1) Press and hold the PROGRAM button for
3 seconds to enter programming mode.
2) Press the desired CHASE (1~6) button.
3) Use the Step Up/Step Down buttons to
scroll through the chase and arrive at the
step number for which you would like to
add a step to.
4) Select a FIXTURE button.
5) Adjust the Faders to the desired look on
stage.
6) Press Music/Add button and one step
number will be added after the previously
displayed step number. All FIXTURES
LED indicators will flash to confirm
successful copy.
7) Repeat steps 3~6 until all scenes have
been added to the chase.
8) Press and hold the PROGRAM button for
3 seconds to exit programming mode.

Delete a Chase

Action ·
1) Press and hold the PROGRAM button for
3 seconds to enter programming mode.
2) Press the CHASE button (1~6) to be
deleted.
3) Press and hold the AUTO/DEL button and
the respective CHASE button then release
to delete the chase. All LED's will blink 3
times. All FIXTURES LED indicators will
flash to confirm successful copy.
Obey 10 User Manual
¥
Notes
The step will be added after the scene displayed
on the digital readout.
¥
Notes
Steps will remain programmed on the controller.
Only the chase is affected.
13 Rev. 5