OPERATING AND REPAIR MANUAL NO.08/13 FOR GKS-PERFEKT
A L W A Y S K E E P T H E O P E R A T I N G M A N U A L C L O S E A T H A N D !
please read through this manual carefully before the first usage of your new twin lifter!
The operating manual contains important information on
transport
operation, including fault clearance
maintenance
All of the figures are used to provide visualisation and clarity. The details must not always correspond
to the current design status. This particularly applies for conversions made, for example, at the
customer's request. We reserve the right to make minor technical changes due to upgrading of the
twin lifter without changing this operating manual. This operating manual was created to the best of
our knowledge and with great care. Printing errors can still not be completely ruled out.
The weight of the load and the floor conditions must be checked before the GKS - Perfekt twin lifters
are used.
Safety zone:
Includes the freight, the immediate area around the freight and an adequately large additional
clearance to prevent property damage or personal injury, even when heavy freight tips over.
The operating personnel must ensure that no unauthorised persons are located in the safety
zone! The twin lifter must be inspected for visible defects before usage
Do not overload the twin lifter, i.e. the permissible maximum load must not be exceeded, even
in the case of an eccentric centre of gravity. The manufacturer shall assume no liability for
damages resulting from overloading.
Do not use the twin lifter on inclined routes – loss of braking effect
Move the load carefully and, if possible, always in the longitudinal direction
The applicable mandatory regulations for accident prevention and the recognised technical rules
for safety and proper operation in the country of usage and at the usage site must be observed.
Installation and assembly work may only be performed by qualified specialists
TWIN LIFTER TYPE TW28
Dear customer,
GENERAL SAFETY INSTRUCTIONS
SAFETY INFORMATION
Page 2