Care And Cleaning; Cleaning Tips; Troubleshooting - Black and Decker FusionBlade BL1550 Serie Manual De Uso Y Cuidado

CARE AND CLEANING

This product contains no user serviceable parts. Refer service to qualified
service personnel.
• Make sure the unit is unplugged before cleaning. Wipe the blender base
using a damp cloth. Do not immerse the blender base in water.
• Lift the blending jar by the handle off the base.
• Remove lid and lid cap.
• Wash removable parts by hand or in the dishwasher. Place the blending
jar on the bottom rack and the rest of the parts on the top rack only.
Caution: Blades are sharp. Handle with care when hand washing.

CLEANING TIPS:

• For quick cleanup, combine 1 cup hot water and a drop of liquid dish soap
in the blending jar.
• Cover and blend on Speed 2 for about 30 seconds.
• Discard liquid and rinse thoroughly.
Important:
• Do not place the jar parts in boiling liquids.
• Do not immerse the base in liquid. Wipe the base with a damp cloth and
dry thoroughly.
• Remove stubborn spots by rubbing with a damp cloth and nonabrasive
cleaner.
Note: If liquids spill onto the base, wipe with a damp cloth and dry
thoroughly. Do not use rough scouring pads or cleansers on parts or finish.

TROUBLESHOOTING

Problem Possible Cause
LED blinking Blender overheated or
quickly
button held longer
(100 msec/time)
than 30 seconds.
Blender stops/ Blending time exceeds
goes into
2.5 minutes.
STANDBY mode
All manuals and user guides at all-guides.com
9
Solution
Unit must be reset. Unplug to
reset. Let unit cool for at least
20 minutes.
Re-select appropriate speed
setting to start blender.