Description Of Symbols - Silverline 948829 Manual Del Usuario

EN
Introduction
Thank you for purchasing this Silverline product. This manual contains
information necessary for safe and effective operation of this product. This
product has unique features and, even if you are familiar with similar
products, it is necessary to read this manual carefully to ensure you fully
understand the instructions. Ensure all users of the product read and fully
understand this manual. Keep these instructions with the product for future
reference.
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Technical Abbreviations Key
V Volts
~ a.c. Alternating current
A, mA Ampere, milli-Amp
Ah Amp hours (battery capacity)
n No load speed
⎓ , d.c. 0 Direct current
Hz Hertz
W, kW Watt, kilowatt
opm
Operations per minute
dB(A)
Decibel sound level (A weighted)
2
m/s Metres per second squared (vibration magnitude)
Specification
Voltage:
No load speed:
Oscillation arc range:
Protection class
Ingress Protection:
Dimensions (L x W x H):
Weight:
Battery:
Cell type:
Voltage:
Capacity:
Charger:
Input power:
Output power:
Charging time:
Cord length:
Protection class:
Ingress protection:
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound & vibration information
Sound pressure L
PA
Sound power L
WA
Uncertainty K
Weighted Vibration
ah
Uncertainty
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measure are necessary.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct
level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense
of touch, numbness, tingling and reduced ability to grip. Long-term
exposure can lead to a chronic condition. If necessary, limit the length of
time exposed to vibration and use anti-vibration gloves. Do not operate the
tool with hands below a normal comfortable temperature, as vibration will
have a greater effect. Use the figures provided in the specification relating
to vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
international standards. The figures represent normal use for the tool in
normal working conditions. A poorly maintained, incorrectly assembled, or
misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in
the workplace that may be useful to domestic users who use tools for long
periods of time.
silverlinetools.com
Original Instructions
18V
5000-19000opm
3.2°
IPX0
310 x 770 x 100mm
1.2kg
Li-ion
18V⎓
2Ah
230V~ 50Hz, 1.2A
22V⎓, 2.4A
1 hours
1.8m
IPX0
79.8dB(A)
90.8dB(A)
3dB
9.6 m/s²
1.5m/s²
6