Beem Thermostar MiXX & Cook Manual De Instrucciones página 24

Electrodoméstico multifunción
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
Safety instructions
Use only the measuring cup to
close the opening in the mixing
bowl lid. Do not cover the mixing
bowl lid with towels or similar
items.
Use only the supplied spatula
with the safety collar to stir
the mixture in the mixing bowl.
Never use other objects (spoons,
cooking spoons, or similar) for
stirring. Such objects could get
into the rotating mixing knife and
could cause injuries.
Always close the mixing bowl lid
before you insert the spatula into
the lid opening.
Set the appliance onto a non-slip,
clean, and level work surface that
cannot be heated, so that it will
not slip off. Keep a sufficient dis-
tance from the edge of the work
surface to keep the appliance
from falling down.
Do not leave the appliance unat-
tended during operation.
The exiting steam may not be
directed directly towards objects
susceptible to moisture and heat
or appliances and installations
containing electrical components.
Never operate the appliance in a
hot, very damp, or wet environ-
ment. Never place the appliance
or the power cord on hot sur-
faces or near open flames.
Take care that the silicone ring
sits correctly on the knife unit.
Take care that the mixing knife is
fixed to the mixing bowl foot.
Take care that the ventilation
slits of the appliance at the rear
and the bottom always are kept
free of grease, food residue, or
similar.
All manuals and user guides at all-guides.com
Operate the appliance only on
AC and on an outlet installed
correctly by a specialist. The
voltage of the outlet and the
mains frequency must be the
same as listed on the nameplate
(at the bottom of the power
unit).
Always make sure that the con-
tact pins at the bottom of the
mixing bowl are clean and dry
before setting the mixing bowl
onto the appliance. Wipe them
dry and clean if required.
23 | EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido