Oase Aquarius Eco Expert 20000 Manual página 27

Installation
• Position the pump horizontally on a firm, mud-free surface.
• Ensure that the pump is securely positioned.

To ensure stability, it is possible to screw the unit to a suitable base.
Connecting the switching power pack to the pump
NOTE
If water penetrates the plug connectors, this will destroy the pump.
Never undo the union nuts on the plug connectors.

• The stud on the plug connector of the pump must engage with the plug connector of the
switching power pack.
Do not plug the power plug into the outlet yet!
Once the plug connectors of the filter pump and switching power pack have been inserted and
have engaged, they can only be disconnected by means of a screw driver. (→ Connecting the
switching power pack to the pump)
AMX0077
EN
AMX0079
ARS0060
AMX0077
27