Kobalt 6904 Manual Del Usuario página 5

All manuals and user guides at all-guides.com
SaFetY inFOrmatiOn
perSOnaL SaFetY
warninG: The operation of any power tool can result in foreign objects being thrown into
your eyes, which can result in severe eye damage. Before beginning power-tool operation, always
wear safety goggles or safety glasses with side shields and a full-face shield, when needed. We
recommend using a wide vision safety mask over eyeglasses or standard safety glasses with
shields. Always use eye protection marked to comply with ANSI Z87.1.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
avoid accidental starting. Be sure the switch is off before plugging in the tool. Carrying tools
with your finger on the switch or plugging in tools that have the switch on invites accidents.
remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance
enables better control of the tool in unexpected situations.
Use safety equipment. A dust mask, non-skid safety shoes, hard hat, or hearing protection must
be used for appropriate conditions.
Before connecting the tool to a power source (receptacle, outlet, etc.), be sure that the
voltage supplied is the same as that specified on the nameplate of the tool. A power source
with voltage greater than that specified for the tool can result in serious injury to the user as well as
damage to the tool.
tOOL USe anD care
Use clamps or another practical means to support and secure the workpiece to a stable
platform. Holding the work by hand or against your body is unstable and may lead to loss of
control.
Do not force the tool. Use the correct tool for your application. The correct tool will do the job
better and more safely at the rate for which it is designed.
Do not use tool if the switch does not turn it on or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the
tool accidentally.
Store idle tools out of the reach of children and other untrained persons. Tools are dangerous
in the hands of untrained users.
check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool's operation. If damaged, have the tool serviced before using.
Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on another tool.
Do not alter or misuse tool. These tools are precision built. Any alteration or modification not
specified is misuse and may result in a dangerous condition.
5