Reverse Door - Klarstein Bigboy 10033681 Manual Del Usuario

All manuals and user guides at all-guides.com

REVERSE DOOR

• Required tools: Phillips screwdriver and flat screwdriver:
• Make sure the appliance is empty and unplug the appliance from the wall outlet.
• If you remove the door, you must tilt the unit back. Lean the appliance against a
stable wall from which it cannot slip.
• Pick up all accessories, you will need them when you reinstall the door.
• Do not place the unit flat on the floor as this may damage the cooling system.
• Always change the door with 2 people.
1
Unscrew hinge cover.
2
Open the door and
unscrew the top hinge.
Then take the door from
the cabinet and place it
on a soft pad to avoid
damage.
Carefully lie down the rear of cabinet on a soft pad.
Remove two levelling feet first. Then unscrew the door
hinge and left foot base. If there is a screw at left front
corner, remove it before install hinge.
3
Remove the cover and
screws at left side and t
them to right side.
4
EN
19