Fluidmaster THE EVERYTHING Guía De Instalación Rápida página 5

STEP 4:
INSTALL TANK-TO-BOWL GASKET
A: INSTALL LOCKNUT
Holding flush valve in place, screw locknut onto bottom of
flush valve and hand-tighten to secure. Use
go ½ turn beyond hand-tight.
Do not overtighten.
Red Wrench
B:
Apply red tank-to-bowl gasket to
bottom of flush valve locknut, fully
covering locknut.
8
All manuals and user guides at all-guides.com
STEP 5: SECURE TANK TO BOWL
red wrench
to
A: INSTALL RUBBER WASHERS
Place one rubber washer on each
tank bolt.
B: INSERT BOLTS INTO TANK
Place tank bolts through bottom
holes of tank.
C: SECURE TANK ONTO BOWL
Set tank onto bowl. Place metal
washer and large hex nut on each
bolt under toilet bowl. Using
tool, tighten hex nuts evenly until
tank is snug and does not rock. Do
not overtighten.
Green Tool
Rubber
washer
Rubber
washer
Tank
Bowl
Metal washer
Large hex nut
green
9