Fluidmaster THE EVERYTHING Guía De Instalación Rápida página 8

STEP 9: FINISHING STEPS
A: CONNECT FLAPPER CHAIN
Attach clip to the tank lever directly
above the flapper. Leave roughly ½"
of slack (small 'J' shape) in the chain.
B: ATTACH WATER SUPPLY
CONNECTOR TO FILL VALVE
*Hand-tighten only. Do not overtighten.
C: TURN ON WATER
Check for leaks.
14
All manuals and user guides at all-guides.com
STEP 9: FINISHING STEPS
D: WATER LEVEL
Lever Hole
* Overtightening may damage fill valve or coupling nut, potentially causing flooding.
Make sure the float cup does not touch the tank walls or tank lever and flush valve.
**
The top of the overflow pipe must be a minimum of 1" below tank lever hole.
After the tank stops filling, water level should fill the tank to
roughly ½" below top of overflow pipe to ensure a proper flush.
(Does not need to be exact.)
(CONTINUED)
Top of
Overflow Tube
1/2"
Water Level
Overflow Pipe
15