Lotus SMARTIME 50024/2 Manual De Usuario página 9

How to operate if can not receive
message push?
1. Firstly please confirm that the button for
message push have already turned on at
the mobile phone APP.
2. Please confirm whether messages can be
displayed normally in the mobile phone
notification bar. If there is no notification,
please follow the instruction on how to set
message notification to turn on the notifi-
cation for phone APP.
Simple handling method for com-
mon problems
Due to the differences of different mobile
phones, sometimes the Bluetooth connec-
tion between the mobile phone and the
watch may be unstable. You can turn off the
bluetooth of the mobile phone, forget the
device and connect it again or restart the mo-
bile phone, or restart the watch, restore facto-
ry settings, etc.
Shortcut function
introduction
1. Swipe from left to right on the dial interface
to view daily notification history. Follow the
instruction to connect the bluetooth be-
tween the watch and mobile phone, you
can receive mobile phone notifications.
2. Swipe from right to left on the dial inter-
face to enter the heart rate testing.
3. Swipe the dial interface from top to bot-
tom to enter the status bar interface (Blue-
tooth connection status / adjust screen
brightness / power / time / data / torch /
non-disturb mode).
4. Swipe the dial interface from bottom to
top to enter the menu interface, slide up /
down to select the icon, and touch or slide
left to right to enter the corresponding
function.
5. Long press the dial on the dial interface to
enter the dial selection interface, you can
slide left and right, and then short press
the touch screen to select the dial.
6. Button function:
Select button: Press to select/confirm.
Long press to power on or power off.
Back button: Press to turn on/turn off the
screen when on DIAL interface; Press to
back to previous interface.
Main functions
introduction
Swipe from bottom to top on the dial inter-
face to enter the menu interface, you can
swipe up and down to select the function,
touch or swipe from right to left to enter the
secondary menu interface.
1. Multi-sports mode:
(walking, running, climbing, cycling, indoor
run, free exercise)
Select the corresponding sport mode, tap
the screen to enter the ready-to-start sport in-
terface, and then tap directly to enter the cor-
responding sport mode; swipe the screen to
the right to the save or end sport interface.
Data will be sync to the APP when it is saved
and the device connects to the APP. If you
delete it, the APP will have no record.
GPS function: GPS is available for some
sporting mode. Please still in open space
when GPS is being activated. One green
dot is flickering on GPS start interface at the
same time. GPS smart watch vibrate and stop
searching GPS signal when GPS activated,
and then it enters into sporting mode auto-
matically.
2. Notification:
the APP needs to obtain the SMS or other
APP notification permission of the mobile
phone first. Then the device can synchronize
the latest 5 notifications from mobile phone.
9 9