Vivotek SD8363E Guía De Instalación Rápida página 9

IMPORTANT:
If your camera comes without the dehumidifier,
you should examine whether the color of the
silica gel inside the chassis has turned red. If
so, you should replace the desiccant bag.
To replace the desiccant bags:
1. Remove the dome cover by loosening 4 T25
anti-tamper screws.
2. Replace the desiccant bags by attaching
them firmly to the inside of the chassis.
3. Re-install the dome cover.
Also note the following:
1. Do not install the camera in a raining day.
2. It takes approximately 2 days to suppress
the moisture level to 30% or lower, either
using the desiccant bags or the dehumidifier.
3. Condensation may still be observed from on
the dome cover within 30 minutes.
All manuals and user guides at all-guides.com
EN-8