Eiko SCRG Instrucciones De Instalación página 2

INSTALLATION (continued):
Pendant with 3/4" Conduit
1. Loosen the screw on the side of the housing and pull out the connecting plate.
2. Connect the wires as shown in figure 2.
3. Screw the lamp and conduit pole together tightly.
1
Surface-Mounted with Side-Wiring
1. Remove the lens and metal cover in the middle.
2. Cut off wires coming out of 3/4" hole and seal the hole with provided plug. Drill 4 holes on four corners
and fix it onto the ceiling with suitable screws.
3. Remove 1/2" plug against the direction you intend to connect the conduit.
4. Relocate the wire from 3/4" hole to 1/2" hole and connect to the conduit as following.
5. Put back the middle metal cover and lens, make sure no wires are pinched or exposed during the whole
process.
1
4
EiKO Global, LLC • 23220 W. 84th St, Shawnee, KS 66227 • (P) 1-800-852-2217 • (F) 1-800-492-8975 • eiko.com
EiKO Canada • 81 King St, Barrie, Ontario L4N 6B5 • (P) 1-705-721-5189 • (F) 1-705-721-7855 • orderdesk@eiko.com
2
2
5
3
3