Sensor Set-Up - Eiko SCRG Instrucciones De Instalación

SENSOR:
Specifications
Operating Voltage
Rated Load
HF System
Transmitting Power
Power Consumption
Detection Range (ø)
Max. Mounting Height
Hold Time
Stand-by Period
Stand-by DIM Level
Daylight Sensor
Operating Temperature
IP Rating

Sensor Set-up

1. Remove the lens.
2. Adjust the combination of DIP switches with appropriate tool according to needs.
3. Put back the lens and check the function of sensor.
1
Detection Pattern
Fast Walk
Mounting Height: 9.8ft/3M
• Please do not set the detection sensitivity to 25% when mounting at the height of 19.7ft/6M+.
• Please do not set the dectection sensitivity to 25%/50%/75% when mounting at the height of 26.2ft/8M+.
EiKO Global, LLC • 23220 W. 84th St, Shawnee, KS 66227 • (P) 1-800-852-2217 • (F) 1-800-492-8975 • eiko.com
EiKO Canada • 81 King St, Barrie, Ontario L4N 6B5 • (P) 1-705-721-5189 • (F) 1-705-721-7855 • orderdesk@eiko.com
120/277Vac
120Vac 50/60Hz 3.6A Electronic/Magnetic Ballast
277Vac 50/60Hz 3.4A Electronic/Magnetic Ballast
5.8GHz±75MHz, ISM wave band
<0.5mW
≤1.0W (stand-by)
39.4ft/12m Max.
26.2ft/8m
Sensor: 8S/30S/1min/5min/10min/15min/30min
Remote Control: 8S/1min/5min/15min/30min
Sensor: 0S/1min/3min/5min/10min/15min/30min/+∞
Remote Control: 0S/1min/5min/30min/+∞
Sensor: 10%/20%/30%/40%
Remote Control: 10%/20%/30%/40%/50%
Sensor: 5Lux/15Lux/30Lux/50Lux/100Lux/150Lux/Disable
Remote Control: 5Lux/15Lux/50Lux/150Lux/Disable
-35°C~70°C
IP20
2
Slow Walk Fast Walk
Mounting Height: 19.7ft/6M
3
Slow Walk Fast Walk
Mounting Height: 26.2ft/8M
Slow Walk