Troubleshooting; Basic Parameters - TCL Sweeva 100 Manual

EN

7. Troubleshooting

Failure description
Low battery voltage
Roller brush is not spinning
Side brush is not spinning
Unable to start the robot
Weak suction
Louder noise
Unable to start with the remote
control
Unable to charge
The robot stops automatically

8. Basic parameters

Sweeva1000 main machine
Sweeva1000 main adapter
Model:
GSC"X"0600S019V12E
(X=U,T,V,B,U=US,
T=JP,V=EU,B=UK).
X=U stands for US plug,X=T stands for Japan plug,X=V stands for Europe plug,X=B stands for UK plug.
Charge the robot manually
Remove hair and foreign substances on the roller brush.
Remove hair and foreign substances on the side brush.
Confirm whether the robot is fully charged.
Confirm whether the power button on the bottom of the robot is in the "ON" position
Check whether the fan suction port is blocked by foreign substances.
Empty the dustbin.Clean or replace the high-efficiency filter of the dustbin.
Confirm whether the dustbin is installed correctly.
Confirm whether the high-efficiency filter of the dust bin is installed.
Check if there is any foreign substances stuck on the roller brush or side brushes.
Replace the remote control battery (triple-A battery)
Remove the objects around the charging base and make sure that the power supply
is connected to the charging base
Please wipe the charging contacts of the charging base with a dry cloth.
Please wipe the charging contacts of the main machine with a dry cloth.
Whether the roller brush is stuck and stops spinning, whether the side brush is stuck
and stops spinning.
Whether the side wheel is stuck, which makes the robot unable to move forward
Confirm whether the robot is feeding.
Global:
Model EU: SW1000B
UK: SW1000BK SW1000WK
Size
Battery
Net weight
Rated voltage
Rated power
Power input
Model
Input
Output
Connector type
Rated input
Rated output
Solutions
B100A
SW1000W
19V 0.6A
B100G00AA
19V 0.6A
19V 0.6A
19V 0.6A
- 14 -