Setting The Alarm - A&D Medical UA-789AC Manual De Instrucciones

Using the Monitor

Setting the Alarm

This monitor allows you to set up to three alarms per day to notify you
when to take your blood pressure. To set the alarm(s):
1. Press and hold the clock button until the year
digits start blinking. Then press and release the
memory button.
"P-1" will be shown at the middle of the display
screen indicating that this is the first alarm.
NOTE: If you do not wish to set an alarm, press the memory
button several times to return to the main screen or allow the
display to disappear after 30 seconds.
2. Select the hour using the START button and
press the clock button to set the hour and move
to the minute selection. After selecting and
setting the minute, press the memory button to
complete the alarm setting.
3. The display will move onto the second alarm
setting and conclude with the third alarm setting.
Repeat the previous step if you need a second or
third alarm.
When the alarm is set, a "P" will appear on the
main screen. If you do not see a "P" on the main
screen, press the clock button to activate the alarm
function. When the alarm sounds, it will last for one
minute. To turn the alarm off immediately, press the
START button.
NOTE: To deactivate the alarm function, simply press the clock button once. You can
reactivate the alarm function by pressing the clock button again.
E-13