Door Reversibility; Instructions For Totally Built-In Appliances - Kuppersbusch IK 164-4 Z Istrucciones Para El Montaje Y El Uso

This appliance complies with EEC directive
number, 87/308 of 2/6/87 relative to radio
interference suppression.
This appliance complies with the following
E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.

Door reversibility

D163
The appliance's door has been locked in position for
transport by means of pins on both sides. According
to the door opening direction, remove relevant pins at
the top and at the bottom.
Instructions for totally built-in
appliances
Dimensions of the recess
Height of housing
Depth of housing
Width of housing
1. For safety reasons, minimum ventilation must be
as shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
A
B
mm 880
mm 550
mm 560
2. Apply joint the sealing strip as shown in figure.
3. Slide the appliance into the recess, pushing it
against the wall on the handle side.
4. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4 screws
provided in the kit included with the appliance.
Snap vent grille (C) and hinge cover (D) into
position.
19
D765
A
D022
D
D727
C