Dometic ACX Serie Guía Rápida página 12

• Do not operate the device in unventilated areas
such as enclosed premises, tents, motor vehi-
cles, motor homes, caravans, ships, yachts,
boots and truck cabs.
• Never place the device near flammable materi-
als (paper, dry leaves, textiles).
• Keep flammable objects away from the burner.
• Never store liquid gas cylinders in unventilated
areas or below ground level (funnel shaped
holes in the ground).
• Keep liquid gas cylinders away from direct sun-
light. The temperature may not exceed 50 °C.
• Never use a naked flame to check the cooler for
leaks.
• When connecting the cooler to an external gas
connection socket, there must be a shut-off
device in the gas line so that the cooler can be
cut off separately. The shut-off device must be
easily accessible.
• If you smell gas:
– Close the gas supply cock and the valve on
the cylinder.
– Do not press an electric switch.
– Put out any naked flames.
– Have the gas system checked by a specialist.
• Do not store any explosive substances such as
spray cans with a flammable propellant in the
cooling device.
!
CAUTION! Failure to obey these
cautions could result in minor or
moderate injury.
Health hazard
• Please check if the cooling capacity of the device
is suitable for storing the food or medicine you
wish to cool.
• Food may only be stored in its original packag-
ing or in suitable containers.
• Opening the lid for long periods can cause
significant increase of the temperature in the
compartments of the device.
• Clean regularly surfaces that can come in contact
with food and accessible drainage systems.
• Store raw meat and fish in suitable containers in
the device, so that it is not in contact with or can
drip onto other food.
12
All manuals and user guides at all-guides.com
• If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the lid open to prevent mould
developing within the device.
A
NOTICE!
Damage hazard
• Only carry the cooling device upright.
• Check that the voltage specification on the type
plate corresponds to that of the energy supply.
• Do not use electrical devices inside the cooling
device unless they are recommended by the
manufacturer for the purpose.
• Hazard from excessively low temperature
Ensure that only those objects are placed in the
cooling device that are intended to be cooled at
the selected temperature.
• The cooling device shall not be exposed to rain.