Operation; Husqvarna Connect; To Set The Product In Operation Position; To Set The Cutting Height - Husqvarna LC 142i Manual De Uso

Introduction
WARNING:
product, you must read and understand the
safety chapter.

Husqvarna Connect

Husqvarna Connect is a free app for your mobile device.
The Husqvarna Connect app gives extended functions
for your Husqvarna product:
• Extended product information.
• Information about, and help with, product parts and
servicing.
To start to use Husqvarna Connect
1. Download the Husqvarna Connect app on your
mobile device.
2. Register in the Husqvarna Connect app.
3. Follow the instruction steps in the Husqvarna
Connect app to connect and register the product.
Note:
Husqvarna Connect app is not available for
download in all markets. Speak to your servicing
dealer for more information.

To set the product in operation position

1. Fold the handle rearward.
1692 - 003 - 15.12.2021

Operation

Before you operate the
2. Move the lower knobs up in the direction of the
handle until they stop and you hear a click.
3. Fold the upper handle fully up.
4. Tighten the upper knobs fully.
WARNING:
unless the handle is fully folded up and set
in one of the applicable height positions.
To adjust the handle height on page
Refer to
9 .

To set the cutting height

1. Move the cutting height lever rearward to increase
the cutting height.
Do not operate the product
11