LIVARNO LUX LSLB 100 A1 Manual De Instrucciones E Indicaciones De Seguridad página 29

LIVARNO LUX LSLB 100 A1
Remove the 4 screws and take off the cover of
the terminal box (7).
1. Release the power cable fitting (8) by turning
anticlockwise, using a suitable open-jawed
spanner if required.
2. Remove the power cable fitting (8) and the
seal underneath it (arrow). Note: Pay attention
to the correct installation position of this seal for
when you put it back together later.
Guide the power cable fitting (8) over the
power cable as shown in the diagram opposite.
English - 27