Important - Ravas 1100 Manual Del Usuario

The touch panel
Each key has an operational and an entry function.
Operational
function
zero setting and
automatic tare
tare entry
totalising
on / off
Important
Operation of a key is not accepted unless the weighing system is stable (and the sign "load stable"
lights up). This means that the indicator only executes commands with a stable load.
Warning
When the weighed load surpasses the pre‐set maximum, the display shows: "HELP1". In order to
prevent damage to the indicator or load cells, the weighing system must be unloaded
immediately.
Tilted position
With the approved version of the weighing system, the help display shows small bars when this
system is in a tilted position larger than 2°. In this case, the weighing system must be placed in a
horizontal position. After this, the system continues executing any commands.
Entry function
confirm and
digit to the left
decreasing flashing digit
increasing flashing digit
clear
‐ 8 ‐