Hotplate Function; Boil-Dry And Overheat Protection; Lift-Off Shutdown; Cleaning Outside - GRAFF WK350 Manual De Instrucciones

packaging), remove the unit from the base station and slowly pout the tea into a cup.
CAUTION
Risk of scalding by escaping steam.
Put the unit back onto the base station.
●

HOTPLATE FUNCTION

You have the possibility of retain the requested temperature - except the
approx. 30 minutes. You can choose this function during or after the brewing process.
Touch on the desired temperature.
●
The selected temperature flashes.
●
Subsequently, touch the
●
The symbol flashes.
●
After activation, the temperature selection as well as the warm-keeping symbol will illumi-
●
nate.
When the desired temperature has bee reached, it will be kept for approx. 30 minutes.
●
Then the unit will switch off.
By touching the
●
again.
IMPORTANT!
The unit will boil up now and again in order to keep the requested temperature.
Whilst keeping warm, the electric kettle can be removed from the base station. If it is put on
the base station again, the desired temperature will be kept further on.

BOIL-DRY AND OVERHEAT PROTECTION

This unit has been fitted with a dry-out and overheat protection. If it should happen that you op-
erate the unit without water or with too little water, the unit will switch off. Wait for a short moment
until the unit has cooled down. Fill the unit with water and continue as usual.

LIFT-OFF SHUTDOWN

Should you remove the unit from the base station during the boiling process, the unit will switch
off itself. This is the so-called lift-off shutdown.

CLEANING OUTSIDE

Remove the plug from the socket and let the unit cool down. Use a soft and moist cloth to clean
the outer surfaces of the unit. Use a mild detergent in case of heavy soiling.
Never clean the unit and the base station under running water and never immerse them into
water.
symbol.
symbol once again, you can cancel the warm-keeping function
DE
EN
FR
NL
temperature - for
IT
ES
DK
SE
NO
PL
HU
UKR
27