Korona 18050 Manual De Instrucciones página 18

Before First Use
• Remove all packaging material and check whether the appliance is undamaged.
• Fully unwind the power cord.
• Clean the appliance as described under Cleaning and Care.
• Place the appliance on an even and heat resistant surface. Do not place it on top of a metal surface.
Do not use the appliance if it shows any signs of damage!
Warning: Plastic bags are a danger to toddlers and babies, therefore keep them away to avoid
suffocation.
Maximum and Minimum Filling Level
Never exceed the maximum or go under the minimum filling level.
When only filling up to the minimum level, make sure that the protrusion of the frothing/stirring attachment
is covered with milk.
Operation
Never open the appliance lid (1) during operation – hot milk could evaporate – Danger of serious
burns!
Note:
- Milk is a natural product, therefore the chosen milk may influence the result of the milk foam.
- The higher the fat content of the milk the better the foaming result.
- Never consume milk that has been standing in the mug for an extended period of time, always use fresh,
cold milk.
- Never leave the appliance unattended during use.
Frothing / Heating up milk
1. Place the milk frother on top of an even and heat resistant surface.
2. Remove the mug (2) from the motor base (3).
3. Depending on the programme you wish to choose, insert the frothing (5) or stirring (6) attachment into
the mug (2).
4. Fill in some cold milk, observing the minimum / maximum filling level inside the mug (2).
5. Close the mug (2) by inserting the lid (1).
6. Place the mug (2) properly into the motor base (3), in order for the safety switch (7) to be pushed down.
7. Connect (9) the appliance to a properly installed wall socket.
Make sure your local voltage matches the technical data of the appliance.
18
For heating milk only - Max. 400 ml
For frothing milk - Max. 190 ml
For heating / frothing - Min. 100 ml