8. Choose the desired programme by turning the dial switch (4) onto the respective symbol.
9. Press the on/off button (4) to start the frothing / heating up process.
10. Once the frothing / heating up process is finished, the appliance shuts off automatically.
11. Remove the milk mug (2) and place it onto the insulation mat (8) to avoid damage to the respective
surface.
You can always switch off the appliance by pressing the on/off button.
The temperature of accessible surfaces may be high during operation. Therefore, do not
touch the appliance during and/or immediately after operation. Especially, the milk mug and the
heating plate inside the motor base.
Always disconnect the appliance from the mains if you are not using it!
Dry-boil cut-out
The appliance is equipped with a boil-dry cut-out, which will switch off the appliance automatically, should
it accidentally be operated without liquid or by not observing the minimum filling level. In the event of such
a safety cut-out unplug the appliance immediately and let it cool down for approx. 10 minutes. Afterwards,
your appliance is ready for use again.
Cleaning and Care
Due to hygienic reasons clean your appliance after each use, and remove any milk residues.
Before cleaning, always switch off the appliance and disconnect it from the mains and let
it completely cool down.
Clean the appliance as soon as possible after use with a damp cloth and do not use any aggressive cleaning
agents.
All detachable parts can be cleaned in warm water using some dishwashing detergent. Rinse them
afterwards and dry them thoroughly.
The milk mug can also be cleaned in the dishwasher.
After cleaning, reassemble the appliance and store it in a clean and dry place and keep it away from children.
Instruction Manual
ENGLISH
19