Battery Charging - Steinberg SBS-PW-60/5 Manual De Instrucciones

5. GENERAL SCALE OPERATION AND KEYPAD OPERATION
5.1 Preparation before use
Insert the AC power plug at the right side at the bottom of the scale; put the
scale on a solid and smooth platform. The scale should avoid vibration, violent air
current, direct sunshine and high temperature.
After connecting with AC power, please check whether the AC indicator lamp lights
up, if not, check relevant parts.
5.2 Weighing
Not weigh goods over the max capacity. Once overload (weight window displays
OL), and the buzzer gives consecutive sound, please remove the goods immediately
to avoid unexpected damage.
5.3 Entering the unit price
Input the unit price with ten number keys from 0 to 9 before or after loading.
The interval between one number and the next of the same unit price should
not more than about six seconds (if over six seconds, the system will clear the
previous value automatically)
If the weight window displays negative value (eg. Negative tare weight), the
amount window will display "-------------", which indicates no amount.
If the amount window displays"--------------", it indicates that the accumulation
EN
sum is over 9999.99 (EUR)
5.4 Tare
When weighing bulk goods, put the container on the scale pan, then press key
[TARE] and wait for the weight window displays "000.00", indicating that the scale
is ready for weighing. Put the goods into the container, and the weight window
will display the net weight.
Note: tare weight + net weight <max capacity
5.5 Saving, changing the unit price
Saving: first input the unit price you want to save by choosing ten digit keys from
0 to 9, then press key [SAVE], and then press key [Mx] (x=1~8), the unit price
will be saved (the original unit price saved in the key[Mx] will be replaced by the
new one)
5.6 Adding
When a customer buys many goods with different prices, this scale can add
amount one by one and get the total amount.
For example:
Goods A, 1.500kg, EUR 5.00/kg; Goods B, 0.700kg, EUR 8.00/kg;
14
Rev. 06.04.2022
Please operate as follows:
1. Put the goods A on the scale pan, the weight window will display "1.500" (kg).
Input the unit price "5.00" (EUR/kg), the amount window will display "7.50"
(EUR);
2. Press key [ADD], the adding indicator lamp will light up to indicate the scale is
under adding mode. The weight window will display "Add01", and the amount
window will display "7.50" (EUR).
3. Remove the goods A and wait for that the scale returns back to the weighing
mode;
4. Put the goods B on the scale pan, the weight window will display "0.700" (kg),
then input the unit price "8.00" (EUR/kg), the amount window will display
"5.60" (EUR);
5. Press key [ADD], the adding indicator lamp will light up to indicate the scale
is under adding mode. The weight window will display "Add", the unit price
window will display "02", and the amount window will display"13.10"(EUR).
You can continue the adding operation as the above steps up to 99 times.
5.7 Clearing
Under the adding mode, press key [CLR], the unit price window will display "Clr",
and the adding indicator lamp will be out which indicates that the scale is not in
adding status.
Under non-adding mode, if you input the wrong unit price, press key [CLR] and
input the correct unit price;
5.8 Zero
The weight window does not display "0.000" when unloaded, please press key
[ZERO] (within the range of ±60d).
5.9 Turning off the scale
Please press key [ON/OFF] and then pull power plug out.
6. ENVIRONMENT TEMPERATURE
Transportation and storage: -25℃~ +50℃
Work: 0℃ ~ + 40℃
7. ENVIRONMENT HUMIDITY
Transportation and storage: <70% R H (Non-dew)
Work: <90% R H (Non-dew)

8. BATTERY CHARGING

Please charge the storage battery in time after using it to avoid damage. The
charge time should be at least 1.2hours for using one hour. If the scale will be not
used for a long time, please do not forget to charge the scale for consecutive 24
hours every 2 or 3 months to avoid damage caused by self-discharge of storage
Rev. 06.04.2022
15
EN