ES
Warning! Switch off before any adjustment!
PT
Operation safety warnings :
EN
• Check the product as well as accessories for damage before each use. Do not use the
product if it is damaged or shows wear.
• Double check that the accessories and attachments are properly fixed.
• Always hold the product on its handle. Keep the handle dry to ensure safe support.
• Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
• Switch the product off immediately if you are disturbed while working by other people
entering the working area. Always let the product come to complete stop before putting
it down.
• Do not overwork yourself. Take regular breaks to ensure you can concentrate on the
work and have full control over the product.
• Before switching the product on, check whether it has been assembled correctly and all
the moving parts are running smoothly.
• We recommend slightly dampening surfaces in dusty conditions or using a mister
attachment.
• WARNING: In some countries regulations define at what time of the day and on what
special days products are allowed to be used and what restrictions apply! Ask your
community for detailed information and observe the regulations in order to preserve a
peaceful neighbourhood and avoid committing administrative offences!
Operating hours - Only operate the product at reasonable hours - not early in the
morning, late at night or on weekends/public holidays when people might be disturbed.
Inform yourself about local restrictions
• Avoid using the product in bad weather conditions, especially when there is a risk of
lightning. Do not operate the product in poor lighting. The operator requires a clear view
of the work area to identify potential hazards.
• Operating similar tools nearby increases both the risk of hearing injury and the potential
for other persons to enter your work area.
• Keep firm footing and balance.
• Do not overreach. Overreaching can result in loss of balance. Always be sure of the
footing on slopes.
• Walk, never run. Keep all parts of your body away from any moving part.
• Never run the product without the proper equipment attached.
51