Flown Installation; Stacked Installation - dB Technologies VIO S115 Manual De Uso

English

FLOWN INSTALLATION

Flown installations can be created using the DRK-1 or DRK-2 fly bar to achieve greater sound coverage. The VIO
S115 must be fixed using the LP-4 link plate and the screws supplied with the fly bar. The LP-5 link plate must be
used as an interface between the VIO S115 and the VIO X206 speaker.
The maximum limits for all the configurations according to principle safety standards are indicated on the labels
and in the instructions of the accessories.
For any other configuration requiring maximum loading of the system and of the flying points, check the
permitted installations, read the instructions supplied or contact dBTechnologies.

STACKED INSTALLATION

The subwoofer can be positioned on the ground in stacked installations; the example installations shown below
are for illustrative purposes only.
VIO S115
Cod. 420120357 REV. 1.0
36